1 bigha in square feet

There is no single answer. 1 bigha is 27,000 sq ft in Uttar Pradesh, 9,070 sq ft in Punjab and 27,220 sq ft in Bihar. Pick your state below and convert any value.

Last updated: 20 November 2026

Short answer: 1 bigha = 27,000 sq ft in Uttar Pradesh, 9,070 sq ft in Punjab and Haryana, 27,220 sq ft in Bihar, 14,400 sq ft in West Bengal, and 17,424 sq ft in Gujarat.

Show in
—

Share on WhatsApp
All units at a glance
EquivalentValue

Bigha to square feet chart

The table uses the value most commonly cited in each state. Where a state has both a pucca and a kaccha measure, the pucca value is shown and the difference is noted.

State1 bigha (sq ft)1 bigha (acre)Note
Uttar Pradesh27,0000.62Pucca; some districts use 25,000
Punjab9,0700.21About 1,008 sq yd; 20 biswa
Haryana9,0700.21Same as Punjab
Himachal Pradesh8,7120.20968 sq yd
Uttarakhand6,8040.16756 sq yd
Madhya Pradesh12,1000.28About 1,344 sq yd
Rajasthan27,2250.63Pucca; kaccha about 17,424
Gujarat17,4240.400.4 acre
Bihar27,2200.6220 katha
Jharkhand27,2200.6220 katha
West Bengal14,4000.3320 katha
Assam14,4000.335 katha
Before you rely on any number: ask which bigha is being used — pucca or kaccha, old settlement or current. The same plot can be “2 bigha” in conversation and a different area on the sale deed.

The formula

Once you know the state's bigha value, the arithmetic is simple:

  • Square feet = bigha × state factor
  • Acres = square feet ÷ 43,560
  • Guntha = square feet ÷ 1,089
  • Cents = square feet ÷ 435.6
  • Square metres = square feet ÷ 10.7639

Worked examples

2 bigha in Uttar Pradesh: 2 × 27,000 = 54,000 sq ft. In acres, 54,000 ÷ 43,560 = 1.24 acre. In guntha, 54,000 ÷ 1,089 = 49.6 guntha.

3 bigha in Punjab: 3 × 9,070 = 27,210 sq ft. That is 27,210 ÷ 43,560 = 0.62 acre, or about 5 kanal (since 1 kanal is 5,445 sq ft).

Price check in Bihar: 1.5 bigha at ₹40,00,000. Area = 1.5 × 27,220 = 40,830 sq ft. Rate = 40,00,000 ÷ 40,830 = about ₹98 per sq ft, or about ₹1.33 lakh per katha (1,361 sq ft).

Why bigha changes by state

Bigha predates standardised measurement. It described how much land a pair of bullocks could plough in a day, so it varied with soil, crop and local revenue practice. When each state formalised its records, it kept its own definition instead of converting to a national unit.

That is why a property advertisement saying “2 bigha” is incomplete. In UP that is about 54,000 sq ft; in Punjab it is about 18,140 sq ft — a third of the area for the same phrase.

The difference compounds in price. ₹40 lakh buys about 40,830 sq ft in Bihar at ₹98 per sq ft, but only 18,140 sq ft in Punjab at ₹220 per sq ft. Same money, less than half the land.

What to check before buying agricultural land

  • Ask which bigha. Pucca or kaccha, and which survey system the seller is quoting.
  • Read the record of rights. Khasra and khatauni in UP, jamabandi in Punjab and Haryana, 7/12 in Maharashtra, RTC in Karnataka, RoR in Odisha.
  • Match the sale deed. The deed should state the area in square feet or square metres, not only in bigha.
  • Get a demarcation. Ask for a local amin or surveyor to mark the boundaries before payment.
  • Compare circle rate and market rate. Stamp duty is usually calculated on the higher of the two in many states.

Frequently asked questions

How many square feet is 1 bigha in Uttar Pradesh?

1 pucca bigha in Uttar Pradesh is about 27,000 sq ft, or 0.62 acre. Some eastern districts and kaccha measures use about 25,000 sq ft, so confirm the local convention before a sale.

How many square feet is 1 bigha in Punjab?

1 bigha in Punjab is about 9,070 sq ft, which is 1,008 square yards or 0.21 acre. Punjab and Haryana use the same standard, with 20 marla to a kanal and 20 biswa to a bigha.

How many square feet is 1 bigha in Bihar?

1 bigha in Bihar is about 27,220 sq ft. It is divided into 20 katha, so 1 katha is about 1,361 sq ft.

How many bigha are in 1 acre?

It depends on the state. One acre is about 1.6 bigha in Uttar Pradesh, 4.8 bigha in Punjab, 3 bigha in West Bengal, 2.5 bigha in Gujarat and 1.6 bigha in Bihar.

Is bigha used in South India?

Not usually. South Indian land records use guntha or gunta, cent, ground, acre and hectare. Bigha is mainly a north and east Indian unit.

Related conversions